5 Tier Mirrored Effect Maypole Cupcake Stand

Code:RMAY5-MIR

Be the first to review this product

Availability: In stock

Regular Price: $109.00

Special Price: $95.00

OR

Quick Overview

This 5 Tier maypole round Cupcake Stand can be used as 5 tier or smaller tier. It is specially designed so it can be used as smaller cupcake stand. 
All tier can be used as top tier or bottom tier.


The entire size: 
Length 350 * Width 350 * Height 421mm
Length 350mm(13.8") * Width 350(13.8")* Height 421(16.6")mm
This stand will hold around 52 cupcakes.

5 Tier Mirrored Effect Maypole Cupcake Stand

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Product Description

5 Tier Maypole Mirror Effects Cupcake Stand - It comes with 4 acrylic feet

The acrylic comes wrapped in the manufactures protective covering and the bottom of the Tier is in WHITE colour for the mirror effects.

There is no need for glue or other fixings.
The edges of the acrylic are perfectly clear and polished. Every part of the stand has been accurately cut and finished. 
Can be taken apart, washed and stored away for another time. 
The stand comes flat packed and only takes a few minutes to assemble.
# Each tier is 100mm apart and the total height of the stand is 430mm.
# The acrylic comes wrapped in the manufactures protective covering
# 1st,2nd,3rd,4th tier is 4mm(0.16") thick, 5th tier is 5mm(0.2") thick . 

The entire size:  
Length 350mm(13.8") * Width 350(13.8")* Height 421(16.6")mm

Tier 1: Dia 150mm, (5.9")
Tier 2: Dia 200mm, (7.9")
Tier 3: Dia 250mm, (9.8")
Tier 4: Dia 300mm, (11.8")
Tier 5: Dia 350mm, (13.8") 

Rod Size : Diameter 25mm(1") x Height 100mm(3.9")

This cupcake stand can hold approximately 52 cupcakes.We base our numbers on using a 60mm(2") diameter cupcake. 

Below you will find an example of how many cupcakes can be arranged on each tier. 


Download Assembly instructions for Round Maypole cupcake Stand

PLEASE NOTE: You must remove the manufacturers’ thin layer of protective cover off the top of the mirror plates before assembling this product. Do not tear the white base as it will damage the mirror plate. Leave the white base as it is. The stand is not designed to move around once built so construct it in its final resting place. Do not attempt to move the stand once it has cakes on it.

ASSEMBLY GUIDE:

Parts: Mirror plates, head screws, double screws, acrylic rods and acrylic feet.

* Remove the protective cover from the top of the plate. The base of the mirror plate is white in color. Do not tear the white base as it will damage the mirror plates.
* Begin by placing the feet to the underside of the bottom plate ensuring they are evenly spaced. Acrylic feet are not adhesive so any mirror plate can be used as bottom tier.
* Take a metal head screw and place it on to a flat surface where the stand is to be constructed.
* Carefully line up the hole(s) of the largest plate with head screw ensuring the plate is resting securely on the acrylic feet.
* Now screw the first rod onto the screw thread of head screw making sure the mirror plate is clamped firmly between two acrylic rods.
* Continue by placing the next largest plate on to the screw thread of rod and tighten each mirror plate as you go.
* The final rod is to be used as the support for the final tier and the stand is completed by adding the other head screw into the top.

CARE GUIDE:

* The stand is made from acrylic which will scratch if it is not looked after properly. 
* To clean the product use warm water with a little washing-up liquid and soft cloth. 
* Do not use any abrasive cleaning products as they will make the acrylic. 
* Do not put the stand in a dishwater



Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.